DeWalt AC200+ Acrylic Injection Adhesive Anchoring System & Post-Installed Reinforcing Bar Connections

Dewalt AC200+ Acrylic Injection Adhesive Anchoring System And Post-Installed Reinforcing Bar Connections - 10oz (280 ml) - Dewalt PFC1271050

The AC200+ is a two-component, high strength adhesive anchoring system. The system includes injection adhesive in plastic cartridges, mixing nozzles, dispensing tools and hole cleaning equipment.The AC200+ is designed for bonding threaded rod and reinforcing bar hardware into drilled holes inconcrete base materials and for post-installed reinforcing bar connections.

• Designed for use with threaded rod and reinforcing bar hardware elements
• Evaluated and recognized for freeze/thaw performance
• Cartridge design allows for multiple uses using extra mixing nozzles
• Mixing nozzles proportion adhesive and provide simple delivery method into drilled holes
• Evaluated and recognized for long term and short term loading

• Designed for use with threaded rod and reinforcing bar hardware elements
• Evaluated and recognized for freeze/thaw performance
• Cartridge design allows for multiple uses using extra mixing nozzles
• Mixing nozzles proportion adhesive and provide simple delivery method into drilled holes
• Evaluated and recognized for long term and short term loading

• International Code Council, Evaluation Service (ICC-ES) ESR-4027 for cracked and uncracked concrete
• Code Compliant with the International Building Code/International Residential Code: 2018 IBC/IRC, 2015 IBC/IRC, 2012 IBC/IRC, and 2009 IBC/IRC
• Tested in accordance with ACI 355.4, ASTM E488, and ICC-ES AC308 for use in structural concrete (Design according to ACI 318-14, Chapter 17 and ACI 318-11/08 Appendix D)
• Evaluated and qualified by an accredited independent testing laboratory for recognition in cracked and uncracked concrete including seismic and wind loading
• Compliant with NSF/ANSI 61 for drinking water system components - health effects; minimum requirements for materials in contact with potable water and water treatment
• Conforms to requirements of ASTM C881 and AASHTO M235, Types I, II, IV and V, Grade 3, Class A
• Department of Transportation listings - see www.DEWALT.com or contact transportation agency

* All Pictures Shown Are For Illustration Purpose Only. Actual Product May Vary Due To Product Enhancement.